Thread: ACA500 tested
View Single Post
Old 31 May 2014, 20:28   #449
freaktmp
Registered User
 
Join Date: Dec 2011
Location: Patra / Greece
Posts: 7
Quote:
Originally Posted by Photon View Post
Just one from when you have the problem is less confusing! Looks hunky dory to me, so likely it's between the firmware and kickstart. You could check early-boot Boards menu or run Sysinfo/SysSpeed and check the memlist.
The third photo is when the problem occurs.

Quote:
That's what I can suggest, I don't know enough about ACA1230 but from this it's clear to me that you won't get any ACA1230 RAM unless you MapROM kick 3.1, you're using 2.05.
It makes no difference the kickstart version used. When maprom is enabled, fast ram and cf aux slot stop working. As shown, fast ram and aux cf slot work fine with 2.05 as long as maprom is disabled.


Quote:
Originally Posted by Photon View Post
And I understand now why you posted several images, it seems to me the settings are changed between reboots.
Perhaps I wasn't clear enough. This is how it goes:
Power on
First photo
Select F1 configuration
Boot to workbench without fast ram and cf aux slot
Second photo
Reset - interrupt with mouse button
Third photo
Power off

Power on
Expert configuration menu, select F5 and F8 (maprom disabled)
Boot to workbench with fast ram and cf aux slot
Fourth photo
Reset - interrupt with mouse button
Fifth photo

Quote:
Did you save the settings to profile #1?
No, I have not saved or used saved profiles #1 and #2 (F6/F7 on the main menu)
freaktmp is offline  
 
Page generated in 0.05114 seconds with 9 queries