View Single Post
Old 06 May 2014, 04:26   #7
Registered User

Join Date: May 2014
Location: Dallas / USA
Posts: 10
Try placing "0" in the Surfaces, Sectors and Reserved fields of the HDF properties leaving 512 in the block size. Restart/reboot the emulation. Then run Hdtoolbox and see if it's there.

I've noticed if you do this it's then possible for HDToolbox to Read configuration automatically.

Last edited by vorpal86; 06 May 2014 at 06:05.
vorpal86 is offline  
Page generated in 0.05008 seconds with 9 queries