View Single Post
Old 09 March 2014, 19:30   #80
ShK
Registered User
 
ShK's Avatar
 
Join Date: Mar 2013
Location: Lahti / Finland
Age: 52
Posts: 451
Before before I do that copying test, I installed the memory card in a real Amiga 600.

It gives Capacity in blocks : 15523200 (the memory card has been cleaned with diskpart)

Code:
Warning: Required memory type for device not found.
Assuming MEMF_24BITDMA.
SCSIQuery 1.33 (22.11.99) © THOR
Generic sense data : 

Good.

Device inquiry data : 

Device status           : connected.
Device class            : optical memory device.
Removable medium device.
Device type modifier    : 00.
ISO version             : 00.
ECMA version            : 00.
ANSI version            : SCSI-2.
Response data format    : SCSI-2.
Additional data length 1F.
Flags:
	Relative addressing not supported.
	32 bit wide SCSI not supported.
	16 bit wide SCSI supported.
	Synchron data transfer not supported.
	Linked commands not supported.
	Tagged queues not supported.
	Device reacts with hard reset.
Vendor                  : SD      
Product                 : to CF Adapter   
Version                 : 45.0
Date                    : 
Comment                 : 

Extended inquiry data : 

	00 00 00 00 00 00 00 00  ........
	00 00 00 00 00 00 00 00  ........
	00 00 00 00 00 00 00 00  ........
	00 00 00 00 00 00 00     ....... 



Control page information:

Mode Data Length : 5
Medium Type      : 0
Device specific  : 0
Block des. len   : 0



Device capacity : 

Capacity in blocks : 15523200.
Block length       : 512.
Length in the middle of the medium in blocks: 0.


Primary defect list:
Read Defect List Header returned error : 
Check Condition         : Details as below.
LBA not valid.
Error code of last command.
Segment ID              : 00.
SenseFlags              :
Sense Key               : Illegal request.
Additional sense length : 10.
Cmd information bytes   : 00 00 00 00.
Drive specific flags    :
Extended sense code ASC : 0x20.
Extended sense code ASCQ: 0x00.
ASC,ASCQ encoded error is invalid command operation code.
Field replaceable unit code FRUC 0x00.
Additional flags        :
	Error data output.
	Byte error.
	Bit position 0x00.
Byte position           : 0x00 0x00.


Grown defect list:
Read Defect List Header returned error : 
Check Condition         : Details as below.
LBA not valid.
Error code of last command.
Segment ID              : 00.
SenseFlags              :
Sense Key               : Illegal request.
Additional sense length : 10.
Cmd information bytes   : 00 00 00 00.
Drive specific flags    :
Extended sense code ASC : 0x20.
Extended sense code ASCQ: 0x00.
ASC,ASCQ encoded error is invalid command operation code.
Field replaceable unit code FRUC 0x00.
Additional flags        :
	Error data output.
	Byte error.
	Bit position 0x00.
Byte position           : 0x00 0x00.
ShK is offline  
 
Page generated in 0.07861 seconds with 11 queries