View Single Post
Old 22 February 2014, 00:16   #102
kipper2k
Registered User

 
Join Date: Sep 2006
Location: Thunder Bay, Canada
Posts: 3,616
Quote:
Originally Posted by johnim View Post
hi guys i got this usb a[IMG][/IMG]dapter http://www.ebay.com/itm/USB-auf-RS23...611684&afsrc=1

if i use the power from the adapter do i still need floppy power as i cant get it to reconise my gotek

Hi,

you need to install drivers for windows and also, red goes to 5v on 4 pin power adapter, black to ground on 4 pin power header. put a jumper across the left 2 pins, then white, then green. they are the only connections you need to program it. I bought the same programmer as you.

I'll post a pic




I soldered a header to the board to make life easier. once programmed remove the jumper on the left and move the s1 jumper to s0 like mine

Last edited by kipper2k; 22 February 2014 at 00:29.
kipper2k is offline  
 
Page generated in 0.08439 seconds with 9 queries