View Single Post
Old 18 February 2014, 21:00   #91
Registered User

Higgy's Avatar
Join Date: Jan 2014
Location: Oxfordshire
Posts: 315
Originally Posted by cpiac64 View Post
is possible rework the mainbord for move the usb in the position of eject button?
You can desolder the existing USB and fit headers or extension wires, or you might be able to just tack on wires to the backside of the pcb. The LED's are not needed. The display already has header pins on both sides.
Like I said on previous post, in the end I could not be bothered and just mounted it into my A1200 as per pics.
I aligned GOTEK in new position then used small drill to make new holes in GOTEK, then fitted screws. I have the two normal screws at top of floppy drive and drilled hole in GOTEK to utilise the lower angled bracket that is used on original floppy.
Higgy is offline  
Page generated in 0.05159 seconds with 9 queries