View Single Post
Old 15 February 2014, 18:42   #53
Registered User

Higgy's Avatar
Join Date: Jan 2014
Location: Oxfordshire
Posts: 315
It works. I used your last comment regarding removing the S0 jumper.

But... I does not boot after selecting ADF. And I have to do the jumper trick to get back to SELECTER.

I had IDE compact flash installed, but currently removed the Flash Card. I did not want to remove IDE interface because ribbon cable is tight.

Will take some PCB pics.

Thanks for your help.

Last edited by Higgy; 15 February 2014 at 19:25. Reason: added issues.
Higgy is offline  
Page generated in 0.04854 seconds with 9 queries