View Single Post
Old 15 February 2014, 12:03   #5
Registered User
Join Date: Aug 2004
Posts: 2,476
I'm still seeing the reset loop though. Even with the config I attached above, but changing CPU to cycle-exact 68000 (non-JIT of course).

There are lines like these in the log output (2014-02-14 17:58 winuae.exe):
Illegal instruction: 4e7b at 00F80C38 -> 00F80CC0
Illegal instruction: 00ff at 00A00100 -> 00F80AD2

Testing the 68000 config with 2.7.1b7 caused WinUAE to crash with this log output:
Illegal instruction: 4e7b at 00F80C38 -> 00F80CC0
Fastcard: mapped @$200000: 8MB fast memory
   Card 1 (ZorroII) done.
A590/A2091 BOOT ROM '.\a2091PDMA-07.U12'
ExceptionFilter Trap: 00000016 38EBD4D8 00000000
  D0 00000000   D1 00000020   D2 00000020   D3 00000000 
  D4 00000000   D5 00000000   D6 FFFFFFFF   D7 00000000 
  A0 00E80048   A1 00000B6C   A2 00E80000   A3 00000C00 
  A4 00E80000   A5 00000758   A6 00000A74   A7 000003B0 
USP  00000000 ISP  000003B0 
T=00 S=1 M=0 X=0 N=0 Z=0 V=0 C=0 IMASK=7 STP=0
Prefetch 7000 (MOVE) 1081 (MOVE) Chip latch 00000000
00FBD4D8 1081                     MOVE.B D1,(A0)
Access violation! (68KPC=00FBD4D8 HOSTADDR=00000016)
delayed exception2!
ExceptionFilter Trap: 00000016 38E80000 38EBD4D8
wine: Unhandled page fault on read access to 0x00000016 at address 0x792b23 (thread 0009), starting debugger...
Attached Files
File Type: zip (3.1 KB, 43 views)
mark_k is online now  
Page generated in 0.05056 seconds with 10 queries