Thread: ACA500 tested
View Single Post
Old 18 December 2013, 14:29   #189

Join Date: Dec 2009
Location: UK
Posts: 2,704
Originally Posted by Toni Wilen View Post
Boot each time (before setpatch is run and after setpatch resets it) without startup-sequence and run tools/showconfig to 100% confirm memory setup. Do not trust any other program
Thanks Toni, I'll try that tonight. One thing though, I don't seem to be able to use CTRL-D when booting from the boot card to break to CLI, I can if I boot from WB disk? Looks like renaming the startup-sequence and booting.

EDIT: Toni, as you probably suspected it's setpatch that's the culprit! Booted with no s-s and showconfig reports 1.0mb chip, run setpatch and after rebooting again with no s-s I have 0.5mb chip! There's also an error when running setpatch: Checksum failure! exec.library, exec 45.20 (6.1.2002). Happens on the second run of setpatch and is reported 3 times, piped the output to a file to capture it. Do I try to uninstall Boing Bag 2?

Last edited by BarryB; 18 December 2013 at 18:47.
BarryB is online now  
Page generated in 0.03962 seconds with 10 queries