Again I read the last two posts and updated the mount file as follows
Code:
Unit = 3
Device = uaehf.device
FileSystem = L:FastFileSystem
Flags = 0
Surfaces = 1
SectorsPerTrack = 504
SectorSize = 512
Mask = 0x7ffffffe
MaxTransfer = 0x20000
Reserved = 2
Interleave = 0
LowCyl = 2
HighCyl = 5864
Buffers = 30
BufMemType = 0
StackSize = 1000
Priority = 10
GlobVec = -1
DosType = 0x444F5301
Mount = 1
/*Activate = 1*/
When I enter "C:Mount HDA" followed by "CD HDA:" I get nothing. Should I be getting an error message? I just want to confirm the mount file is ok so that I can continue with the other combinations.
Quote:
Originally Posted by mark_k
When you search your image file for 44 4F 53 03 00 00 00 00 ... are there any results?
|
Yes, but the first entry I found is like 10% into the image file and therefore I ignored it (I would have never just not used 10% of the CF card at the start).
I attached a screenshot to show my results.