SectorSize is always 512 as discussed above. (The words "blocks" and "sectors" have the same meaning in this context. HDToolbox uses "blocks" where Mount uses "sectors".)
Surfaces * SectorsPerTrack should equal blocks per cylinder aka 504.
So Surfaces = 1, SectorsPerTrack = 504 would do as well as Surfaces = 8, SectorsPerTrack = 63 or other combinations. ("Surfaces" is the same as "Heads".)
Reserved should be 2 for FFS.
MaxTransfer should not be higher than 0x20000 or 0x1fe00 for CF cards.
Buffers should be set to at least 30, better 80 for harddisk partitions.
Quote:
Originally Posted by Sim085
I get nothing! (not an error message nothing).
|
Add Activate=1 or Mount=1 to the mount file, otherwise it is only activated when you first access it.
Try CD HDA: or DIR HDA: to access it and eventually get a meaningful error message.