View Single Post
Old 08 February 2003, 23:45   #6
Registered User
Severin's Avatar
Join Date: Dec 2002
Location: Gloucester / UK
Posts: 700
Send a message via ICQ to Severin
Originally posted by Peter Leyland
Thanx.....The pin thats snapped is the exteme left bottom as you peek down the slot....
iirc, that is pin 34 or 35 both of which are ground as is pin 1, so both the left edge pins are ground.

If you can get at it, remove the rest if the pin (bummer of a job) get another straight pin, push it through the connector and solder it to pin 1.

Probably alot easier to get a new motherboard though
Severin is offline  
Page generated in 0.03926 seconds with 10 queries