View Single Post
Old 24 July 2013, 23:59   #24
Turran
Registered User

Turran's Avatar
 
Join Date: May 2012
Location: Stockholm / Sweden
Age: 43
Posts: 916
You can do that anyway with a fine tip =) just remove the clip that secures the keyboard cable from the motherboard connector first (open it all the way, push slighly on one side and it pops out. You see it if you look close).

Then you have plenty of space to desolder the caps without removing the connector =)
Turran is offline  
 
Page generated in 0.04489 seconds with 9 queries