View Single Post
Old 08 April 2013, 19:18   #2000
Registered User
UncleSpam's Avatar
Join Date: Jan 2007
Location: Burbank, CA
Posts: 150
The power supply that I'm using is a fairly new APower power supply which supplies more than enough power for the A1200 needs.

I have re-seated the Indi card several times, power-cycled the computer several times in between re-seatings, with no luck. Again, this was tested on two monitors which display the current Amiga Multiscan:Productivity mode, which displays well using the standard Amiga 23-pin output.

A visual inspection of the motherboard shows no visual issues with the capacitors; everything works properly on the computer except the Indi output.
UncleSpam is offline  
Page generated in 0.04890 seconds with 9 queries