Just when things were getting exciting with the IndivisionAGA MKII, mine seems to have failed.
Currently, there is no video output, but there seems to be a sync, since the monitor (tested on two monitors) does not enter sleep mode.
The last time the Indy worked was while I was using PageStream 4 at 1024x768 and after the following power cycle, no more video output.
I have since tested my A1200 using the monochrome composite output and the 23-pin output with VGA output (via the 23 to 15-pin adapter) and there were no problems...
I'm writing here to see if you have any testing suggestions, before I contact amigakit.