View Single Post
Old 07 April 2013, 03:01   #5
nineoc
Registered User
nineoc's Avatar
 
Join Date: Sep 2006
Location: Burnaby, Canada
Age: 71
Posts: 55
Quote:
Originally Posted by thomas View Post
Yep, this is what I wanted to know. And it's correct. Note that if you change the IP address of the Amiga, you have to change it in all these places, too.

Right, thanks.

In the other thread you said that the range goes from 1 to 253 which leaves nothing for the Amiga. It does not matter if you reduce the upper bound or increase the lower bound. I just thought that it's easier to change the upper boundary because then you don't need to change the Amiga's address.

Ah, right again, thank you. Having an extended Senior moment here.


That's exactly my goal. But as (according to your other thread) there is no address left outside the range, you first have to change the range.

Okay, will investigate this process.

I don't know if AmiTCP has a configuration GUI. Anyhow, you can change the IP address with a text editor in the provider.conf file in the db directory. But you have to restart AmiTCP (or the Amiga) after the change. Be sure to keep backup copies of the files before you change them.
A little outside my range here, so will see what the other investigations turn up.

Am wondering how the tech would have set up the IP Address when he installed the Wildfire.

Thanks again for your patience and assistance.
nineoc is offline  
 
Page generated in 0.09306 seconds with 9 queries