View Single Post
Old 10 March 2013, 11:30   #716
Registered User
paulo_becas's Avatar
Join Date: Feb 2010
Location: Porto/Portugal
Age: 42
Posts: 452
Originally Posted by Schoenfeld View Post

The ACA500 will be delivered with two Kickstart licenses: V1.3 and V3.1. This will let (almost) all A500's out there run the most important software: Some games/demos require Kick1.3 to work, and for WB-based programs, Kick3.1 is the first choice.

The word "almost" has to be explained: the flash chip on the ACA500 is only 512k, and that' not enough to hold both Kickstart images. Only Kick3.1 is in there as crunched image, and Kick1.3 is stored as a "diff" from 1.2 to 1.3. This gives you the following choices:

With physical 1.2 ROM: V1.2/V1.3/V3.1
With physical 1.3 ROM:
With physical 2.0 ROM: V2.0/V3.1
With physical 3.1 ROM: no choice, just Kick 3.1.

This doesn't mean a disadvantage, because you can still load a Kickstart image from CF, so the small size of the flash chip on the ACA500 and the physically installed ROM chip don't actually make a difference.
Ok, sorry for the question but how do we change the kick roms again???
I never did that through a image.
I have a kickswitcher with Kick 1.3 and 3.1.

Sorry but i'm a little confused about this.
paulo_becas is offline  
Page generated in 0.04023 seconds with 10 queries