View Single Post
Old 31 January 2013, 14:25   #11
thomas
Registered User
thomas's Avatar
 
Join Date: Jan 2002
Location: Germany
Posts: 5,552
Please enter the early startup menu immediately after power-on and start without startup-sequence. Then run check4gb from the DOS prompt and save the log.

Now edit s:startup-sequence and remove both loadide and idefix.

Reset and let it boot. Run check4gb again and save the log as a different name.

Then open a Shell window and enter

loadide reset

Let it boot and run Check4GB a third time and save the log again.

Attach all three logs here and describe which partitions were visible when.
thomas is offline  
 
Page generated in 0.08006 seconds with 9 queries