View Single Post
Old 03 January 2013, 13:53   #2
Registered User
Join Date: Apr 2008
Location: Ellesmere Port / UK
Posts: 115
i had a simular config but only a 68000 with 512k+512k and 2mb and type set to scsi0 on the side with the A590/A2091 selected i could add a hdf and partition and prep it but could not format it with either driver disk, i set the type to ide and the install disk would initilize the drive, then use the installer to install workbench 1.3 but after setting back to A590/A2091 i keep getting random crashes.
caver99 is offline  
Page generated in 0.04496 seconds with 9 queries