View Single Post
Old 28 December 2012, 13:48   #10
DH
Moderator

DH's Avatar
 
Join Date: Sep 2008
Location: In a Pub
Age: 51
Posts: 3,999
I know what Akira is talking about, in the day, when I owned the A500 & A1200, there was always horizontal adjustments, they were never centered on my Philips CM8833 or my TV at the time. The TV I couldn't center, that's why I ended up buying the monitor for the A500, just so I could center it.

All CRT TV's at the time were never very accurately centered anyway, the adjustments were probably done by some monkey YTS kid who didn't care. With a computer, I guess, the accuracy was far more important than a TV picture because the transmitted picture always had a fair amount of overscan to contend with, and that adjustment was a preference to the person adjusting it.

So my guess is the UK guidelines for the setting, being a standard frequency/voltage at the time, were not accurate as it has to be today and caused the screen to be off center.
DH is offline  
 
Page generated in 0.04927 seconds with 10 queries