View Single Post
Old 20 December 2012, 11:07   #1
nemazoty
WHD/oldskool maniac

 
Join Date: Dec 2003
Location: Pecs/Hungary
Age: 43
Posts: 96
ScanJuggler NEWS - scandoubler (and flickerfixer) for A1200/A4000

A ScanJuggler XAGA is a scandoubler (Lite) and flickerfixer for some Amiga modells equipped with AGA chipset.

ScanJuggler XAGA Lite (rev.2)

Click image for larger version

Name:	Sj_xaga_lite.jpg
Views:	1898
Size:	30.9 KB
ID:	33517
  • Scandoubler for A1200 and A4000(D) machines
  • When fitted inside an A1200, it fits below the HDD frame and among other add-on cards
  • Max. resolution: 768x580
  • Color depth: 24/21 bit (depending on color mode)
  • PAL/NTSC/Euro36 compatible
  • Slightly reduce interlace blinking
  • Supports Productivity/Euro72/DBLxxx screen modes
  • Supports border blanking
  • DDC/CI support (software is in development)
  • Other special extras (to be announced)
  • Analogue VGA output
  • Est. availability: Q1 2013.
Price: international price to be announced

ScanJuggler XAGA

Click image for larger version

Name:	Sj_xaga.jpg
Views:	1279
Size:	35.3 KB
ID:	33518
  • Scandoubler and Flickerfixer for A1200 and A4000(D) machines
  • When fitted inside an A1200, it fits below the HDD frame and among other add-on cards
  • Max. resolutions, eg.:
  • PAL: 1536x580 (SHiRes support)
  • Custom screen modes: 1280x600, 1024x768
  • Color depth: 24 bit
  • PAL/NTSC/Euro36 compatible
  • Supports Productivity/Euro72/DBLxxx screen modes
  • Supports border blanking
  • DDC/CI support (software is in development)
  • Other special extras (to be announced)
  • DVI-I output (analogue VGA and HDMI possible with a passive adapter)
  • Est. availability: Q1 2013.
Price: international price to be announced

Connectors

Click image for larger version

Name:	Sj_default_cable.jpg
Views:	1285
Size:	14.9 KB
ID:	33519
Default
ScanJuggler comes with a VGA connector by default:
The small add-on on the left fits both into A1200 and A4000. In A1200 it fits together with for example the ELBOX KEY V2.0 and of course the HDD frame. In case of A4000 it doesn't collide with the card put in the lowest slot. The connector has a button, which you can use to control the SJ. This connector doesn't support DDC/CI.

Click image for larger version

Name:	Sj_switcher.jpg
Views:	1249
Size:	16.0 KB
ID:	33520Click image for larger version

Name:	Sj_switcher_inside.jpg
Views:	1230
Size:	18.7 KB
ID:	33521
Extra
The Switcher Module is an extra add-on for the ScanJuggler. It fits below the floppy in an A1200, or into a slot-backplate in an A4000.
It connects to the SJ with a shielded cable and it also has an input connector to for your BVision or CVision. Switching between the inputs is automatic or can be controlled with a button on the module. The button is also used to control other functionality of the SJ. This connector supports DDC/CI.
Price: international price to be announced

Ordering
Additional information available and preordering is possible via e-mail: scanjuggler-at-gmail-dot-com

Source: http://wiki.amigaspirit.hu/index.php/ScanJuggler_en
nemazoty is offline  
AdSense AdSense  
 
Page generated in 0.09207 seconds with 10 queries