View Single Post
Old 10 December 2012, 23:56   #3
clitosa
CLI
clitosa's Avatar
 
Join Date: Nov 2012
Location: Northamptonshire England
Posts: 175
Thumbs down Unable to use UAE

Quote:
Originally Posted by Retrofan View Post
If you just format DH0 you don't loose anything on the rest of partitions.
For other thread your problem is that perhaps your first partition is too small, so then you will have to make that backup of DH1 and DH2, as you will loose all the info changing the size of the partitions.

Are you using a Cf as HD? If so, the easiest way is to make all in WinUAE with a Cf adapter to your PC.

But I don't know really if you have room. WB3.1 doesn't need much mb's. If you have, just boot from the install disk, format DH0 (quick format always) and install it.
Thanks - Unfortunately we are not able to do anything with UAE as we are without the copyright ROM files and have no knowledge of how to set up the Emulator correctly.

Is there an actual process to "safely" installing WB3.1 as mentioned above using our six WB floppy disks?

If so, we would need it explaining in full. As our capabilities on WB are nearly as bad as our inability to UAE.

Attached is some more information on our 4BG CF. Maybe this will help? They are (left to right) DH0, DH1 & DH2.

Thanks
Attached Thumbnails
Click image for larger version

Name:	DH0info.jpg
Views:	156
Size:	97.3 KB
ID:	33407   Click image for larger version

Name:	DH1info.jpg
Views:	141
Size:	481.6 KB
ID:	33408   Click image for larger version

Name:	DH2info.jpg
Views:	124
Size:	79.2 KB
ID:	33409  
clitosa is offline  
 
Page generated in 0.08661 seconds with 10 queries