View Single Post
Old 16 October 2012, 13:46   #1710
Registered User
Join Date: Mar 2012
Location: Karlsruhe
Posts: 37
Originally Posted by Schoenfeld View Post
BVision is a rare unit. And there may be more products that Indivision AGA MK2 does not fit with. I've tried a lot, but it was not possible to avoid BVision with this kind of connector. Any other connector would have increased the cost a lot. There are a lot of possible expansions in an A1200, and Indivision AGA MK2 is avoiding a lot of those already-occupied spaces. However, I can't avoid them all - there's no point in arguing with physics.

On another note, your ground cable is dangerously close to the capacitor just below it. Two of the three return cases I talked about earlier had exactly that user error. I removed the cable (which was pushing on the capacitor), the unit was back to working (not blocking the power supply any more), and everyone was happy. Please rotate the cable a little to the side, so it won't cause a short with that capacitor.

I will rotate the gnd cable.
Would it be possible to have an adaptor to raise the indi2 a bit to solve the bvision problem?

And thanks for the infos.
lolof is offline  
Page generated in 0.04978 seconds with 9 queries