View Single Post
Old 17 August 2012, 10:23   #140
Registered User
Join Date: May 2012
Location: France
Posts: 57
Originally Posted by Schoenfeld View Post
The divider is a different thing, outside the PLL (different solderpads and cooler required).
I know that. What I said is the frequency table show that the 020 always use a 1/3 divider factor and now increase the speed of the CPU and the RAM by increasing the clock.

Sure, it's always possible to hack the divider to 1/2, but it's not interesting because the available range are close and the user will lose much memory speed and risk to permanently damage the CPU, using a wrong jumper setting.

But for the predicted ACA1232 Board, it may be interesting to switch it to 1/3 if it embed a 25Mhz certified CPU. Allowing to increase the RAM speed from 50MHz up to 80Mhz for a close frequency.

Last edited by TotO; 17 August 2012 at 10:45.
TotO is offline  
Page generated in 0.03884 seconds with 10 queries