View Single Post
Old 05 August 2012, 20:33   #80
BlankVector
Registered User
 
Join Date: Jun 2012
Location: Paris, France
Posts: 151
Quote:
Originally Posted by Dwyloc View Post
I can also confirm that it boot and has working keyboard support on my Minimig Amiga A500/A600 FPGA Amiga clone.
Excellent

Quote:
Originally Posted by Dwyloc View Post
I have not tested the A600 IDE support using the Minimigs hardfile emulation as I don't really have the Atari know how to setup a harddisk so I will have to leave that to someone else to test.
Easy: EmuTOS has support for PC-formatted disks and FAT16 partitions. (up to 2 GB - the by-design limit). So you can use any image of a standard PC-formatted USB stick, SD-Card or watever. Important: you must use FAT16 partitions, FAT32 is not supported.

Quote:
Originally Posted by Dwyloc View Post
So far things are looking good, would it be possible to have support for an non interlaced 2 black and white screen mode as well as interlace is a bit tiring on the eyes.
Sure, I just need any 640x400 resolution with 1 plane. However, I'm really not familiar with Amiga hardware. If someone could write a proper initialization routine for such video mode, or at least point me to the relevant documentation, that would be big help.
BlankVector is offline  
 
Page generated in 0.07818 seconds with 9 queries