Quote:
Originally Posted by acadiel
Mitsumi D359T5 3.5" drive - replace DF0 Chinon in A2000 with this. I removed the bridge from DS1 and made it DS0. I also removed the jumper from DC and change it to RDY. I then jumpered pin #2 to DC on the bottom of the drive.
|
I have the Mitsumi D359T5, do you have any more precise instructions?
DS1 -> DS0 is easy
DC -> RDY, do you mean "DCH"?
Pin #2 to DC, you mean on the other side of the circuit board?