View Single Post
Old 07 July 2012, 02:15   #1538
Happy Life
seb132's Avatar
Join Date: May 2012
Location: Sydney
Posts: 195
Send a message via MSN to seb132 Send a message via Yahoo to seb132 Send a message via Skype™ to seb132
@johnim: OK, thanks.

*** Edit due to mix between DVI and HDMI :-P ***

I have installed the Indivision AGA MKii and connected the Amiga 1200 on a 19" Samsung LCD TV model UE19D4000 (perfect with Indi ECS for my A600) and the result is mitigated in the following 2 configurations :

1) DVI: lots of vertical stripes are visible with the DVI output which enters into the TV through VGA with DVI/VGA adaptor. Centering of the picture is acceptable in 4:3 mode, as far as I can see.

2) HDMI: with keeper2k adaptor board and special cable my screen remains black and TV asks for a signal. Doesn't work at all...

Note: the SCART connection on the same TV, through the RGB23 pin direct video output of the Amiga (with or without Indiviion installed on the motherboard) is absolutely perfect : no flickering and no vertical stripe at all !).

Last edited by seb132; 07 July 2012 at 03:43.
seb132 is offline  
Page generated in 0.05056 seconds with 9 queries