View Single Post
Old 21 June 2012, 18:01   #1520
Registered User
Join Date: Sep 2011
Location: MIAMI/USA
Posts: 69
Originally Posted by magnetic View Post
The ground cable does Barely reach the one screw right by the CPU port. However, its very taught and doesnt look safe that way. I ended up running the ground wire to the RF shield due to this. (you can see it in the pic I posted a few pages back)
Well, I'd argue that it's a wire and not a cable anyway

I used the supplied ground wire to ground the DVI connector. I made a longer wire that connects to the screw on the bottom left of the MB(the one with the metal clip), and I soldered it to the Indy instead of using the supplied nut and bolt. I used just the minimum amount of solder so I could easily undo that.

I don't know if it's important to ground the DVI but I figure if you ever get static while connecting the cable... Can't hurt
bbond007 is offline  
Page generated in 0.06019 seconds with 10 queries