View Single Post
Old 13 June 2012, 08:15   #1500
Registered User
Join Date: Sep 2011
Location: MIAMI/USA
Posts: 72
Managed to get the RF modulator removed and got my kipper2k HDMI port installed.

I don't have it connected yet because I don't have a monitor that works with the DVI, so right now I need to use the VGA until the new core is ready...

I tested out the HDMI speaker connections and they did work, however I needed to run a separate ground wire to the RCA jacks. I'm guessing once the HDMI connector is connected to the Indivision it will have grounding, or should I ground the HDMI adapter as well? This may be caused because I put a few strips of electrical tape under under the bolts because I did not like how close the head of one was getting to a surface mount components on my MB version...

My next question is if both cables(the one that came with the Indivision and the one that came with the kipper2k) are compatible. Meaning, can I use the longer cable that came with the Indivision with the kipper2k HDMI port? I just have too much stuff getting in the way and need a longer cable.

BTW everything is super nice quality kit! Thanks!

Last edited by bbond007; 13 June 2012 at 08:23.
bbond007 is offline  
Page generated in 0.03886 seconds with 10 queries