On my REV 1.A I have a 3.1 Kickstart while I have a 3.0 on my 1D4.
There are both working great with my Blizzard 1260 + Indivision AGA MKII + Same CF.
Actually I use the 3.0 on my Rev 1.A.
So yesterday when I have played more than 30 minutes of MP3 in 1024x768, it was with the Kickstart 3.0
Just to share the info.
If I had some time, I would put the oscilloscope at each Resistor/Capacitor mentioned by Jens to see what the signal looks like on working board and compare with a non-working one.
Last edited by gibs; 10 June 2012 at 15:48.