View Single Post
Old 31 May 2012, 21:08   #1284
Join Date: Jan 2010
Location: france
Posts: 932
I have shorted E127R.

I still have glitches Even with 'fblit' now.

I have removed the 1K resistor (the one I put in the FPU place). With the 1K resistance I had 500 ohms at its pins, now removed I have 878 ohms at its pins so with fblit I don't have the glitches anymore (as before).

I have checked the resistance (at the previous pins) on a REV 1A motherboard and it's 950 ohms
I tried the Indivision AGA MKII on the REV 1A, I have the same glitches.
Do I need to Short E127R, Remve E123R, E123C and add the 1K resistor on this revision too ?

Or my Indivision MKII got a problem ?

it seems that glitches appear when I use more than 64 colours @ 1024x768
My background use 16 colours but I need to set screenmode to 128 colours to have the right colours.
Attached Thumbnails
Click image for larger version

Name:	photo-1.jpg
Views:	173
Size:	119.7 KB
ID:	31778   Click image for larger version

Name:	photo-2.jpg
Views:	182
Size:	107.5 KB
ID:	31779  

Last edited by gibs; 31 May 2012 at 23:28.
gibs is offline  
Page generated in 0.05378 seconds with 10 queries