[bernd roesch]

with b2 i get now output in green the framerate 60 on P96 screen. with a pal screen it is not green(only when i use not vsync it is green too). happen if i use vsync or not on P96. always green. whats wrong ?. Do you need any log ?

I notice no diffrence in timing to older versions

EDIT: This are values i get with -vsynclog

VSync remembered: 60.021029Hz/1.0=60.021029Hz. MinV=1 MaxV=1079 Adj=1856 Units=4
5443 87.0%
PAL mode V=60.0195Hz H=15625.0881Hz (227x312+1) IDX=-1 (<?>)
BEAMCON0 0020 -> 0000 PC=1fffd1e6
NTSC mode V=59.8859Hz H=15590.7473Hz (227x262+1) IDX=-1 (<?>)
P96FREQ: 262*59.8859 = 15690.1141 / 60.0 = 261
NTSC mode V=59.8251Hz H=15590.7473Hz (227x262+1) IDX=-1 (<?>)
P96FREQ: 262*59.8251 = 15674.1749 / 60.0 = 261
POS (0 0 1920 1080) - (0 0 1920 1080)[1920,1080] (0 0)
winuae_inactive(0) 8 E: 0 99% ( 99%) 1590
winuae_active(0) 8 E: 0 99% ( 99%) 977
D3D9Ex: Present() 88760872 S=1 F=0876 C=0872 (2162) ()
winuae_inactive(0)289 E: 0 99% ( 99%) 2120
winuae_active(0) 3289 E: 0 99% ( 99%) 6556
D3D9Ex: Present() 88760872 S=1 F=0876 C=0872 (2162) ()
winuae_inactive(0)397 E: 0 99% ( 99%) 1829
F: 1187 M: 3401 E: 0 99% ( 99%) -17914