Quote:
Originally Posted by bernd roesch
But i thought to get vsyn work well and smooth amiga emu need fit the real PC frequency and not the amiga frequency of real hardware. this is of course that programs need run 0.3% faster.
|
Detected rate does not need to be exactly right (which is impossible without long test), it only needs to be close enough (I'd say +-1% or so is still fine without causing problems)
This value is used to set sound and other internal timing values, vsync is still 100% locked to real hardware sync.
EDIT:
Quote:
|
Should this divide by 2 give the real line frequency ?
|
No, it always reports frame rate, not field rate (x/1 if progressive, x/2 if interlaced)
/1 in the log means rate is used 1:1. /2 would be used if PC rate is 100Hz/120Hz. (=it is shown twice / Amiga field)