View Single Post
Old 10 May 2012, 18:20   #1012
Registered User

Abaddon's Avatar
Join Date: Apr 2010
Location: Chicago/USA
Age: 47
Posts: 421
Originally Posted by PopoCop View Post
I've just installed INDI MK2 in my A1200 and nothing happens

My Compaq VGA CRT (I've been using for years with external scandoubler) shows black screen and behaves like there is no input signal at all.
I also tried Samsung LCD with VGA cable and it doesn't display anything ('no signal').

I know that config tool is not available yet but CRT should work without it!

One more thing: do your INDIS fit tight on Lisa chip? I mean is it easy to remove scandoubler from Lisa? My INDI can be quite easy removed without much force - I accidentaly pressed it gently when mounting keyboard interface and it almost fell off.
When I installed mine I also had a blank screen. I hooked the Amiga back up the original way and changed the screen mode to PAL Hires and saved. Then hooked the INDI MK2 back up using a DVI to VGA adapter and was able to see the screen. I then installed the HighGFX driver from aminet and enabled that. I tested a few other drivers as well, but the HighGFX one worked the best for me and then the multiscan driver (productivity).
Abaddon is offline  
Page generated in 0.10295 seconds with 9 queries