I find it ok, although the first line of pins of the second riser gets a bit too separated in your first photo.
I'm still not opening my miggy, but I've sanded one of the risers that I've got in the upper part till the plastic that crosses the risers is (1mm lower).
You could think that now if you try to insert a pin there it won't get all the way into, but it does and keeps firmly there.
What do I get with this? If I put that riser under the fast ata in the lower part of the keyboard and another (not sanded) in the other socket, the second one will have it's pins lower than the first, so reaching better to the kickstart socket.
Last edited by Retrofan; 04 May 2012 at 15:24.