View Single Post
Old 22 February 2012, 12:32   #21
Toni Wilen
WinUAE developer
 
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 42
Posts: 19,675
What IDE mode? CF card in IDE adapter = true IDE mode. CF Card in PCMCIA = not in IDE mode until software reconfigured as IDE.

If you mean removable: ROM built-in driver won't care.

Connect the card, boot standard WB disk, run hdtoolbox: do you see the drive. If not: hardware problem. Not all cards work with Amiga IDE (same problem with some real IDE drives too)
Toni Wilen is offline  
AdSense AdSense  
 
Page generated in 0.04561 seconds with 9 queries