View Single Post
Old 27 November 2002, 21:23   #7
jumbo
 
Posts: n/a
I still cant get any disks to appear in the [Add Harddrive] even if I use the -disableharddrivesafetytest switch.

Ok I only have scsi on my PC and the Amiga HD is using the PFS2 file system.

Heres the log

ASPI: open_driver 103 HostASPIStatus=0x1 HACount=0x3
ASPI: open_driver HostASPIStatus=0x1 HACount=0x3
ASPI: 0:0:0 'V386 ' 'STEALTH DVD ' '1.0h' [CDROM]
ASPI: 1:0:0 'SEAGATE ' 'ST173404LW ' '3E01'
ASPI: 1:1:0 'FUJITSU ' 'MAF3364LP ' '3201'
ASPI: 1:2:0 'CONNER ' 'CFP4207S 4.28GB' '1423'
ASPI: 1:6:0 'PIONEER ' 'DVD-ROM DVD-303 ' '1.09' [CDROM]
ASPI: 2:0:0 'OEI-Link' 'Media Reader 00 ' 'Rev '
support_scsi = 1 support_ioctl = 2
V386 STEALTH DVD 1.0h = uaescsi.device:0
PIONEER DVD-ROM DVD-303 1.09 = uaescsi.device:206

I did manage to get both DVD drives working so that I can use an Amiga CD player.

The Conner drive just wont show up in the config. The output log window says "0 drives detected"

Any ideas anyone.
 
 
Page generated in 0.07687 seconds with 9 queries