View Single Post
Old 22 February 2011, 20:21   #1877
Registered User
Join Date: Sep 2008
Location: N/A
Posts: 420
Originally Posted by ndial View Post
Well, that's what I thought too Dave, but the trapdoor was always open as it doesn't fit. But eitherway if more cooling is needed, other than having the trapdoor open, then this is not a proper hardware for a A1200 system i guess.

Now I really don' t know if the PSU is over-heating, but what I do know is that I've also used the original stock PSU of the A1200 initially. When all these crashes etc started I decided to use an A500 PSU requiring more power for the use of the accelerator .... but same things happened.
Another practice is to remove the top half of the metal sheeting.if you have a jig saw cutter,open up the A1200,and remove the parts.on the bottom half of the case,cut away the small plastic step with the cutter.the card will have less of a bulge.

Last edited by JACK98; 15 November 2013 at 17:42.
JACK98 is offline  
Page generated in 0.04946 seconds with 9 queries