View Single Post
Old 30 January 2011, 15:52   #5
Registered User
Join Date: Nov 2010
Location: Sweden
Posts: 313
Originally Posted by cosmicfrog View Post
but surely the drive is still spinning from a warm boot or am I missing something ??

sounds more like a software fault to me, that is a patch or something
I'm sorry, of course the disk are still spinning after a warm boot.

I've heard that one solution is to cut off wire 1 on the IDE cable?

Originally Posted by xpect View Post
If the problem is drive not spinning fast enough making a warm boot resolves your problem. It's a no brainer and you have no problems at all having to configure skick.

Skick never worked for me on A3640 until I've found that the board had a MAPROM feature (yes, 14 years later! ) and Blizkick worked really well. But try it on your board to see if it works. says that a "U100" is needed. Haven't checked if my A3630 has one, probably not.

Last edited by Graham Humphrey; 30 January 2011 at 17:53. Reason: Back-to-back posts merged
duga is offline  
Page generated in 0.07293 seconds with 9 queries