Originally Posted by Riempie
I have some problems fitting the 28mhz and 56mhz cards nicely. A dutch guy on a dutch amiga forum gave me this url:
It seems you have to cut away some other pieces of the casing instead of only cutting a little piece of the trapdoor.
The cards do work fine if I do not cut anything, but they bend a lot if I do not cut something away.
Same problem with Apollo 1240/1260, but more extreme. I had to shave off the edge around the CPU-slot on the underside. Also had to cut out holes for SIMM from the cover.
I used a Dremel, it was almost to easy to shave it with the Dremel, and fun too! Smelling soft, warm burnt Amiga plastic never gets old