View Single Post
Old 04 January 2011, 09:32   #1345
Damion
Registered User

 
Join Date: Mar 2008
Location: US
Posts: 243
Especially if it's an earlier C= (not Amiga Tech) A1200, I also would replace the caps without question after checking all other basics. I've had A600 and A1200 boards with poor capacitors work fine until you start loading them with expansions, then they become unstable. As mentioned above, often they look OK only to reveal the nasty, tell-tale odor of leakage during removal.
Damion is offline  
 
Page generated in 0.06849 seconds with 9 queries