English Amiga Board - View Single Post - Individual Computers

FOL · 31 December 2010, 00:29

A600

Be careful of the LED connector, when taking A600 apart.

ACA630/25 MHz

A600 Mobo

ACA630/25 MHz Installed

Note the jumper position. I removed the jumper, as I still have an Internal Floppy.
Jumper in first position, disables DF0: completely.
Jumper in second position, disables DF0: and shifts it to DF1: (i.e. External drive = DF0: ).
Connector (that looks like a Jumper) in third position, is for developement only (DONT USE).

Jumper on its own, will disable the card completely.

Note the plastic stand off, there is only one included.

Note the screw (no stand off), so DO NOT OVER TIGHTEN SCREW.

31 December 2010, 00:29	#1244
FOL PSPUAE DEV Join Date: Nov 2006 Location: Wales / UK Age: 45 Posts: 6,023	Some A630/25 MHz Hardware pr0n A600 Be careful of the LED connector, when taking A600 apart. ACA630/25 MHz A600 Mobo ACA630/25 MHz Installed Note the jumper position. I removed the jumper, as I still have an Internal Floppy. Jumper in first position, disables DF0: completely. Jumper in second position, disables DF0: and shifts it to DF1: (i.e. External drive = DF0: ). Connector (that looks like a Jumper) in third position, is for developement only (DONT USE). Jumper on its own, will disable the card completely. Note the plastic stand off, there is only one included. Note the screw (no stand off), so DO NOT OVER TIGHTEN SCREW. Last edited by FOL; 31 December 2010 at 14:53.