View Single Post
Old 22 December 2010, 00:12   #1167
Schoenfeld
electricky.
 
Join Date: Jun 2010
Location: out in the wild
Posts: 1,243
Hi guys,

I thought I did not have to mention it, but there has been a case where someone has managed to damage the A1200 slot connector. Yes, you have to push the card to make the connector slide on the A1200 motherboard. This pressure may only be applied to the beck of the card, or you can also push on the side of the CPU (I get good grip there..), but you may never push on the connector itself! The open wires at the back of the connector are very delicate and they might break or jam the spring contact if you apply pressure to them.

Jens

Quote:
Originally Posted by vroom6sri View Post
are you guys working through the night??!!??
Kind of. I've been doing 14-hour shifts and mostly 7-day weeks since early november. Granted, not only for ACA cards, because there's also Nequester and Chameleon, but I'm really looking forward to the holidays and the tUM party.

Jens

Last edited by TCD; 22 December 2010 at 00:13. Reason: Back to back posts merged. Use the edit function.
Schoenfeld is offline  
 
Page generated in 0.12990 seconds with 9 queries