View Single Post
Old 04 September 2010, 12:01   #75
Ya' like it Retr0?
Zetr0's Avatar
Join Date: Jul 2005
Location: United Kingdom
Age: 43
Posts: 9,768
Hiyas guys,

for the Apollo 060 and the Viper 060 (both similary based ACT cards)

you will need tocopy the Apollo libraries from DF0:LIBS/ to your HDD:LIBS/

so that - LIBS:

68o4o.library [43] KBytes
68040.library [392] Bytes
68060.library [64] KBytes
[we interupt this program to bring you some Apollo 040/060 hardware pr0n]

(thanks from our sponsors

You should then copy from DF0:c/ to HDD:C/


if you are not using CWOS3.9 then you will also need to replace / patch - setpatch in C: (I would recommend setpatch43_b)

now edit the S:startup-sequence and after setpatch place the following:"cpu060 B" (without the quotes)

When using Workbench to dump files across remember to rename or delete the orignals first- I have found that when using the drag 'n drop method of workbench it doesn't overwrite the existing file.

[we interupt this program (again) to bring you some ACT VIPER060 hardware pr0n]

(thanks from our sponsors

I have attached an Apollo install disk, the installer is buggered/mashed/broken so dont bother with that - it says it works but never does.

just follow the instructions above and that should have you sorted =)
Attached Files
File Type: rar Apollo060.rar (269.8 KB, 81 views)

Last edited by Zetr0; 04 September 2010 at 12:10.
Zetr0 is offline  
Page generated in 0.07179 seconds with 11 queries