View Single Post
Old 20 July 2010, 15:04   #2
Thalion Webshrine
alexh's Avatar
Join Date: Jan 2004
Location: Oxford
Posts: 12,122
You have two routes :

  • Any 2.5" PATA (laptop) hard drive
  • 2.5"->3.5" IDE adapter (so you can plug into your PC)

Connect it all up and then format the hard drive & install Workbench 3.0 using E-UAE. If you use FFS (Amiga Fast File System) then you'll be able to mount & read/write your drive in Linux if you add AFFS and Amiga partition support to your Kernel.

There are some restrictions on hard drive size and primary partition size but worry about that once you've got everything together.

Last edited by alexh; 20 July 2010 at 15:11.
alexh is offline  
Page generated in 0.04227 seconds with 10 queries