View Single Post
Old 21 March 2010, 01:04   #5
alexh
Thalion Webshrine
alexh's Avatar
 
Join Date: Jan 2004
Location: Oxford
Posts: 11,879
Most likely to be an incorrectly / partially wired SCART cable. CRT's are very tolerant to incorrect voltages on certain SCART inputs and missing grounds because they drive analog circuitry whereas modern LCD/Plasma displays feed into a digitising system.

Examine your SCART cable wiring and use the diagram created by Ian Steadman for reference. Pay special attention to the values of the resistors used and the number of grounds connected at the SCART end.

http://eab.abime.net/showpost.php?p=592491&postcount=1
alexh is offline  
 
Page generated in 0.05752 seconds with 9 queries