View Single Post
Old 07 March 2010, 02:16   #581
8bitbubsy
Registered User

8bitbubsy's Avatar
 
Join Date: Sep 2009
Location: Norway
Age: 27
Posts: 1,252
Send a message via MSN to 8bitbubsy
You can also dump the EPROM's content connecting some pins of the COM port to two of the EPROM pins + ground. (this can be done with two of the through-hole pins where modchips are getting installed-- easier)
You will need to feed the chip 3.3v-5v, not 12v, so you need a 5v zener or something.. And some resistors.

There's guides for this on the net.
8bitbubsy is offline  
AdSense AdSense  
 
Page generated in 0.05664 seconds with 9 queries