View Single Post
Old 15 February 2010, 16:28   #22
Registered User
orange's Avatar
Join Date: Apr 2007
Location: Belgrade
Posts: 567
here is my experience.
i connected pin 6 to 20 and then pin 4 to 16. it gave me fantastic rgb picture with one small problem; the panasonic tv would occasionally 'detect' again that its rgb (and not composite) and it would display 'RGB' in corner for a sec.
thats because we're not giving enough voltage on pin16. it was a bit annoying, so I connected +5V to 220ohms and then scart pin 16 (I left CPC pin 4 unconnected) and it works great.

btw, I didn't connect the blanking ground (pin18). tried it with first solution (CPC4->scart16) but then would only get black&white picture (composite?)

Last edited by orange; 15 February 2010 at 16:42.
orange is offline  
Page generated in 0.04754 seconds with 9 queries