View Single Post
Old 20 January 2010, 00:50   #5
Gareth
 
Posts: n/a
Thanks a lot for the ideas Konrad, really appreciate it. Gotta agree with you, it's really slow, but I don't have much of a choice =/

Sadly, trying a lower baud rate still results in the same result of the file I'm trying to transfer being 20401 bytes, which is about half the size. Of course, because of the lack of an option on my copy of WorkBench to change... well, any preferences. So the baud rate is just being changed on the PC end, and that's almost certainly going to cause issues. The cable itself is 1m, and I'd imagine that's not too long.

So, uh, is there any other way of changing the serial port settings on WB1.3, maybe via CLI? If I could do that, I'd be able to image the WB disks and sort everything out, but the only other thing I can think of would be to get another set of WorkBench disks and see if they work after changing the rate settings on the Amiga itself. Any ideas?
 
 
Page generated in 0.04648 seconds with 9 queries