View Single Post
Old 17 December 2009, 17:04   #6
Jonathan Drain
Join Date: Sep 2009
Location: Sector K240
Posts: 338
Amiga Explorer is the best tool for serial cable transfer. It will work on the A1000 as long as you have Workbench 1.2. It cleverly sends the Amiga side of the software over the cable. I previously tried PC2Amiga from Aminet but couldn't get it to work.

There's a PC tool called ADFRead to read Amiga disks, but it requires you to install two PC floppy drives (internal, not USB) and may only work on standard-format disks.
Jonathan Drain is offline  
Page generated in 0.03937 seconds with 10 queries