Hi
Having finally got all the bits together I'm getting my finger out and building my A1200 T
Now I have a Blizzard 1260 and the SCSI kit for it. I also have 2x 128MB SIMMS which are identical. One of which works fine on the Blizzard itself but when I put the second on the SCSI the miggy wont boot.
If I put 128 MB on the 1260 and a 64MB on the SCSI, then I get a total of 192 MB as expected. If the 1260 + SCSI is supposed to support 256MB max, what am I missing as far as getting the 128MB going on the SCSI kit ?
Secondly, I've got the Floppy drive connected, but not with any power going to it ...I get a DF0: Unreadable... Icon in workbench. which way round does the power cable go? (this is from an ATX PSU with red black and yellow wires going to the connector) Silly question I know, but I dont want to blow the floppy drive by connecting it the wrong way round
Fortunately I have a pre-built CF with CWB 3.9 so it will "do something".... I'm just trying to connect all the bits
cheers
Andrew